TECHNICS 1210er MK2 läuft nach

[Stillmacher]

Hi Leute!
Vielleicht Kann Mir Jemand Nützlichen Rat Geben. Mein Technics Sl 1210 Mk2 Läuft Beim Anhalten über Start/stop Etwas Nach - Was Sich Verhältnismäßig Gruselig Anhört. Kann Man Da Was Einstellen?? Danke Euch

 

[matt shure]

http://music.hyperreal.org/dj/sl1200.html

6.1 - Adjustment of braking
Doing this you can get your decks to brake hard enuff to make it spin backwards when you hit STOP. Most decks have this set correctly but if yours isn't then you can do this. Pop open the top as described, and look for pot VR201 - It's on the right side next to the blue pitch pot described above and says "brake" next to it. Turn it to the right to increase the braking time. I suggest you just nudge it a little to the right and see what happens by placing the platter back on and playing with the start/stop button. Make sure you unplug the turntable from the wall before taking off the platter again. Note that it takes slightly more force to stop a platter w/record vs. an empty platter.

3.1 - Removing the top ( for access to the circuit board )

1. unplug the TT, remove the platter, secure the tonearm.
2. use a Philips screwdriver to remove the 5 screws holding the plastic cover under the platter.